Directions for Tape Runners
Tape Runners
Memory Tape Runner XL
Vellum Adhesive Runner
Directions for Tape Runner XL
Memory Tape Runner XL Directions:
- Flip protective cap to side and lock into position.
- Grasp applicator with index finger on top and press against paper at a 45o angle.
- Slowly pull runner across surface.
- When finished, lift applicator off surface.
- Flip protective cap closed for storage.
To Refill:
- Pinch the two tabs near front and open.
- Lift out used cartridge and replace with a new refill.
- Snap cover closed.
Directions for Another Tape Runner
Vellum Adhesive Runner Directions:
- Remove protective cap.
- Grasp the applicator and place index finger on grooves on top of dispenser.
- Press flat against background paper (not the vellum or transparency) at a 45o angle.
- Slowly pull (don't push) runner across surface of paper using medium to firm pressure.
- When finished applying, quickly flick runner to the side to break adhesive.
- Place vellum or transparency on adhesive strip. Secure the vellum or transparency in place by smoothing it down with your finger.
- Replace the protective cap for storage.
