Directions for Iron-on Vinyl

HeatnBond Vinyl

Note: Before using Iron-On Vinyl, always PRE-WASH all materials without using fabric softeners (in washer or dryer). Always pre-test adhesive on materials.

Pre-heat iron to medium heat setting without steam. Always work on a smooth surface.
Peel vinyl from protective paper. Place vinyl, sticky side down, onto top of material and smooth down with hands. (Place protective that was just removed) on top of vinyl.
Press and hold iron onto protective paper with medium pressure for 8 seconds. Repeat by gliding iron to new area and pressing 8 seconds, slightly overlapping previous area until entire surface is laminated.
Turn material upside down, to ironing the back of the material instead of the vinyl, with medium pressure, hold iron onto material for 4 seconds. Repeat by gliding iron to new area and pressing 4 seconds, slightly overlapping previous area until entire surface is laminated.
For double sided vinyl projects, simply adhere sticky side of vinyl to the remaining side of material and repeat steps 3-4.
Allow material to cool before using.